CMT-6100-4 type geogrid creep test machine is a creep test under normal temperature and high temperature, which is mainly used for geotechnical material-grid product evaluation 4 geogrid materials creep test can be completed at the same time

The CDW-60 impact test low temperature chamber is a device developed by Liangong for cooling the samples of the Charpy impact test during the low temperature impact test

Tension Parallel to Grain Test --ASTM D143 Standard Test Methods for Small Clear Specimens of Timber

The large diameter steel pipe bending test machine is a special equipment for the technical bending test of steel pipes The steel pipe bending tester has a three-point bending form with stable structure, simple operation and convenient to change mandrels The bending angle is intuitive, easy to maintain, stable, safe and low noise

Cleavage Test --ASTM D143 Standard Test Methods for Small Clear Specimens of Timber

Shear Test --ASTM D143 Standard Test Methods for Small Clear Specimens of Timber

The mechanical tests are static bending, compression parallel to grain, impact bending toughness, compression perpendicular to grain, hardness, shear parallel to grain, cleavage, tension parallel to grain, tension-perpendicular to-grain, and nail-withdrawal tests

ISO 178 test standard specifies a method for determining the flexural properties of rigid and semi-rigid plastics under defined conditions