TB-500 contact current collector shoe wall plate weak connection special impact
  • TB-500 contact current collector shoe wall plate weak connection special impact

TB-500 contact current collector shoe wall plate weak connection special impact

The TB-500 contact current collector shoe wall weak connection special testing machine is used to determine the impact characteristics of the weak connection device of the contact current collector shoe wall board for high-speed railways and high-speed trains, so as to judge that the weak connection device of the shoe wall board is hit by sufficient dynamic load. When it is lowered and broken, the automatic protection lowering bow detection system is reliable and stable.
  • 规格型号:TB-500
The TB-500 contact current collector shoe wall weak connection special testing machine is used to determine the impact characteristics of the weak connection device of the contact current collector shoe wall board for high-speed railways and high-speed trains, so as to judge that the weak connection device of the shoe wall board is hit by sufficient dynamic load. When it is lowered and broken, the automatic protection lowering bow detection system is reliable and stable.
 
The special impact tester adopts electrical appliances to control the automatic swing, impact and placement, which is easy to operate and has high working efficiency. After the sample is punched, the remaining energy is used to automatically raise the pendulum and prepare for the next impact test.
Adjustable support base for the weak connection device of the shoe wall of the contact current collector: The installation height and the strike center of the carbon slide can be adjusted according to the size of the shoe wall of the contact current collector. This machine meet the national standard TB/T 1842.3-2002 "Electric Locomotive Pantograph Sliding Plate Part 3 Carbon Skateboard" and TJ/CL 328-2014 "EMU Carbon Skateboard Interim Technical Conditions" 6.12 Automatic bow lowering sensor device impact characteristics requirements.
 
The main technical parameters
1. Impact energy: 500J
2. Scale range and division value
Energy range: 0-500J Division value per cell: 5J
3. Pendulum force value (impact constant): 0-500J M=267.9492N.m
4. Pre-lift angle of pendulum: 150°
5. Distance from the rotation center of the pendulum shaft to the impact point (the center of the sample): 800mm
6.Impact speed: 5.4m/s
7. Impact hammer surface size: 100x50mm (flat hammer)
8. Net weight of testing machine: 550kg
9. Dimensions of the testing machine: (2200x1200x1400) mm
10. Power supply: three-phase four-wire system 50Hz, 380V
 
Working conditions:
1. Room temperature within the range of 20°C±5°C;
2. Relative humidity is not more than 85%;
3. In an environment without corrosive media;
4. Installed on a concrete foundation with a thickness of not less than 200mm or fixed on a foundation greater than 1400Kg;
5. The level of the installation reference surface on the base is adjusted to within 0.2/1000.

Related Products