Product Categories: Electronic Universal Testing Machine Series; Electro-Hydraulic Servo Universal Testing Machine Series; Impact Testing Machine Series; Impact Testing Low Temperature Chamber Series; Torsion Testing Machine Series; Compression Testing Machine Series; Deep Drawing Cups Testing Machine Series; Bending Testing Machine Series; Specialized Testing Machine Series; Metallographic Series; Hardness Tester Series; Attachment

Special impact testing machine for pantograph dropping device

The special impact tester for pantograph dropping device is independently developed by Liangong to measure the impact resistance of the pantograph slide plate of electric locomotives and the metal-impregnated carbon slide plate under dynamic load. The impact testing machine adopts dual control of hand control box and full touch LCD screen, which is easy to operate and has higher working efficiency.

Product Details Attachment Accessories

Brief introduction
The TB-300 type special impact tester for pantograph dropping device is used to measure the impact resistance of the pantograph slide plate of electric locomotives in the railway industry under dynamic load. It is developed and produced in accordance with the national standard GB/T3808-2002 "Inspection of Pendulum Impact Testing Machine", According to the national standard TBT 1842.2-2002, the impact test of the metal-impregnated carbon slide material is carried out. The testing machine has a large impact energy, and the impact energy is 300J.

Main technical specifications
1. Impact energy: 300J
2. The scale range and division value of the dial
Energy range: 0~300J Division value of each cell: 2J
3. Pendulum force value (impact constant):
Energy range: 0~300J Pendulum force value: M=160.7695N·m
4. Pendulum advance angle: 150°
5. Distance from the center of rotation of the pendulum shaft to the point of impact (the center of the sample): 750mm
6. Impact speed: about 5.2m/s
7. Span of sample support: 720mm
8. Impact knife: φ13mm
9. Main motor power: 250W
10. Net weight of testing machine: 550kg
11. Overall dimensions of the testing machine: 2124×600×1340mm
12. Power supply: three-phase four-wire system 380V, 50Hz
In addition, special impact testing machines for pantograph dropping device of different specifications can be customized according to the actual test requirements of customers.

Back to list

PRODUCT

Special impact testing machine for pantograph dropping device

Related Products

意向加盟通道