WGS-1000B Computer Control Reinforced Concrete Segments Bending and Pull Off Testing Machine
Equipment Usage
This testing machine is designed and manufactured according to GB/T 22082-2017 "Reinforced Concrete Segments" and CJJ/T164-2011 "Shield Tunnel Segment Quality Inspection Technical Standards" and other industry or national standards. It is mainly used for determination of segment bending resistance and pull out resistance. Its structural performance fully meets the requirements of test specifications. Replacing the corresponding attachments can measure the crack and damage load values of the segments, and test the deflection and horizontal displacement of the segments under load. Or measure the maximum pull-out force of the segment lifting bolt and determine its pull -out resistance performance. This testing machine has the characteristics of stable performance, accurate testing, and convenient testing. etc. It is widely used in the production and use of reinforced concrete segments, quality supervision, scientific research institutes and other departments.
Main Technical Parameters
1. Maximum test force: 1000kN
2. Test force measurement range: 1%～100% F.S
3. Force value accuracy: ≤±1% (better than level 1)
4. Test force resolution: 0.05KN
5. Adjusting range of loading speed: 0.1～25KN/s
6. Deformation measurement range: 0～30mm
7. Deformation measurement accuracy: 0.01mm collected by computer
8. Test speed: 0.5mm/min～50mmm/min stepless speed regulation
9. Maximum effective test space: 1500mm adjustable
10. Column spacing: 2200mm
11. Cylinder stroke: 250mm
12. Test accessory: distribution beam: about: 3000mm×500mm×400mm
Loading rod length: 2000mm
Mobile trolley: 900mm×2000mm×400mm (2 pcs)
13, The length of the lower platform of the host: about 9000mm
14. Overall dimensions of main machine: about: 13000mm×2800mm×3580mm
15. Loading medium: 46# anti-wear hydraulic oil
16. With Lenovo brand computer, LCD monitor, HP printer
17. Motor power: 4.0kW
